Monitor: Different monitor level will be generated automatically based on the motion vector including sensitivity level / size of the moving objects / complex of scene. If user wants the system to detect every moving object inside the user defined motion area, then please raise the sensitivity level. For example, if user does not want the system to detect unnecessary object then he can try to lower down the sensitivity. Sensitivity: To define the sensitivity level when system detects real moving object inside the user defined motion area. It is suggested that user to adjust the settings based on real condition and find out suitable settings for different needs. How to assign the IP address to AVer IP camera?įirst of all, please refer to below description and concept regarding “Sensitivity”, “Percentage” and “Monitor”. Otherwise, user may not be able to connect to the IP camera. Too many remote viewers: Check if the concurrent session has reach to 10 remote users simultaneously.However, some disconnection issues may be caused by faulty Ethernet cables, so that user may need to make the cross-test on different Ethernet cables. Ethernet cabling: Make sure the Ethernet cable is well connected on both network switch ( Or the Hub device ) and IP camera side, and check the status of light indicators on those related devices.Also, there are some security / anti-virus software or web browser firewall settings which may also cause the network session failed, it is better to adjust the network security policy settings to clarify the root cause in advance. Network security setting: Check your IT management department to make sure there is no possible network security / firewall setting that may block the network sessions.If you forgot the password, try to make the default factory setting for the IP camera and set a new password for the IP camera ease refer to our download center. Otherwise, it may also cause possible web browser login failed. Password protection: Make sure the password of IP camera has not been changed.Please check the user manual of the router device for detail port forwarding settings. WAN environment ( Internet ): As the LAN IP address ( For example, .x, 10.x.x.x ) is not possible to be viewed via the Internet, so a network router device is needed in such case to forward the LAN IP address to router’s external IP address ( static IP address ), so that user can see the IP camera live image from the outside of the Internet. So, it is also important to make sure to set same subnet mask (ex: 255.255.255.0) for the network device. In some of the cases, strange IP address or subnet mask gets randomly generated by direct connection between the IP camera and a PC / Laptop. ( For example, set IP address 192.168.1.x and subnet mask 255.255.255.0 for PC / Laptop in network settings in Microsoft Windows Operating System and access the IP camera by utility software and set IP address 192.168.1.x and subnet mask 255.255.255.0 for the IP camera. LAN environment: Make sure your PC / Laptop sits as the same network segment as the IP camera.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |